Second mini-project: Inter-domain routing

$35.00

Category: You will Instantly receive a download link for .zip solution file upon Payment || To Order Original Work Click Custom Order?

Description

5/5 - (2 votes)

I. INTRODUCTION
The Internet is an interconnected collection of networks, also called Autonomous Systems (ASs) or domains.
Every pair of neighboring ASs establishes a commercial agreement between them. With some simplification, these
commercial relationships belong to one of two types. In a provider-customer relationship the customer pays the
provider to transit its traffic to and from the rest of the Internet, whereas in a peer-peer relationship the two
peers exchange traffic between themselves and their customers without monetary compensations. We assume that
there are no provider-customer cycles, where each node is a customer of the next around the cycle. Therefore, the
provider-customer relationships determine an hierarchy among the nodes, with a provider at higher level of the
hierarchy than its customers. At the top of the hierarchy are nodes without providers. They are called Tier-1. There
are a dozen of them, including Level3, TeliaSonera, AT&T, Verizon, Deutsche Telekom, Telefonica, and NTT. At
the bottom of the hierarchy are nodes without customers. There are tens of thousands of them. Figure 1 shows a
small internet, where a provider is joined to a customer by a solid line and two peers are joined by a dashed line.
For example, u6 is a provider of both u2 and u3; u6 and u7 are peers. Nodes u10 and u11 are Tier-1 and nodes
u1, u2, u3, and u4 are stubs.
II. ROUTING ACCORDING TO COMMERCIAL POLICIES
The commercial relationships between ASs determine the routing policies configured by the network operator of
each AS. We assume that operators follow the so-called Gao-Rexford routing policies [1].
u1 u4
u5
u10 u11
u2 u3
u6 u7
u8 u9
Fig. 1. An internet. Solid lines join providers to customers, with providers placed higher than customers. Dashed lines join peers.
2
• An AS prefers a customer route (learned from a customer) to a peer route (learned from a peer), and prefers
a peer route to a provider route (learned from a provider). The AS elects the most preferred of the routes
learned from its neighbors.
• An AS exports all elected routes to its customers and exports customers routes to all its neighbors, these being
the only exportations allowed.
A customer path is a path P all links of which join a provider to a customer. A peer path is a path of the
form uvP where u and v are peers and P is a customer path. A provider path is a path of the form P Q where
P is a non-trivial path all links of which join a customer to a provider and Q is either a customer or a peer path.
Customer, peer, and provider paths are usable; all other paths are unusable. In Figure 1, u10u8u6u3 is a customer
path, u10u11u9u7u4 is a peer path, u1u5u10u8u6u3 is a provider path, and u5u2u6 is unusable. It is easy to show
the following correspondences between elected routes and paths.
• If u elects a customer route to reach t, then there is a customer path from u to t.
• If u elects a peer route to reach t, then there is not a customer path from u to t, but there is a peer path from
u to t.
• If u elects a provider route to reach t, then there is neither a customer nor a peer path from u to t, but there
is a provider path from u to t.
• If u does not elect any route to reach t, then all paths from u to t are unusable.
In Figure 1, u7, u9, and u11 elect a customer route to reach u4; u6 and u10 elect a peer route to reach u4; u1, u2,
u3, u5, and u8 elect a provider route to reach u4.
III. ROUTING ACCORDING TO COMMERCIAL POLICIES AND NUMBER OF HOPS
At an extra level of detail, we realize that routes exchanged between neighbor nodes carry the number of hops
from where they were originated up to the node currently holding the route. Among customer routes, among peer
routes, or among provider routes, a node elects the route with the minimum number of hops. For example, in
Figure 1, node u9 elects a customer route with two hops to reach u4, corresponding to customer path u9u7u4.
Node u3 learns from u7 a provider route with two hops, corresponding to provider path u3u7u4, and from u6 a
provider route with three hops, corresponding to path u3u6u7u4. Thus, node u3 elects the provider route with two
hops to reach u4. Node u2 learns from u6 a provider route with three hops, corresponding to path u2u6u7u4, and
from u5 a provider route with six hops, corresponding to path u6u5u10u11u9u7u4. Therefore, node u2 elects the
provider route with three hops to reach u4.
IV. YOUR ASSIGNMENT
What you have to do.
• Design and implement an algorithm that, given a network topology and a destination in that topology, computes
the type of commercial route (provider, peer, customer, or unusable) elected at every node to reach the
destination. The network topology is given as a file in the format shown below.
3
4323 12122 1
12122 4323 3
7018 17228 1
17228 7018 3
29017 34309 2
34309 29017 2
Each line represents a link. The first value is the identifier of the node at the tail of the link. The second value
is the identifier of the AS at the head of the link. The third value is 1 if the tail of the link is a provider of
the head of the link; it is 2 if the tail of the link is a peer of the head of the link; and it is 3 is the tail of the
link is customer of the head of the link. For example, in the table above, 4323 is a provider of 12122. (50%
of the grade.)
• Design and implement an algorithm that, given a network topology and a destination in that topology, computes
the type of commercial route (provider, peer, customer, or unusable) and the number of hops in the route elected
at every node to reach the destination. The network topology is given as a file in the same format as before.
(25% of the grade.)
• Using the algorithms developed above, compare the number of hops in elected routes with the number of hops
in shortest paths. The comparison can be based on the cumulative complementary distribution functions over
all pairs consisting of an origin and a destination. (25% of the grade.)
What do you have to deliver, how, and when.
• You have to deliver your code and a report with a cover page and no more than three other pages containing a
text explanation of your algorithms, their pseudo-codes, their asymptotic complexities, the statistics required,
and a short discussion.
• The code and the report should be sent in a .zip file to my email address with subject p2..zip
where is your group number.
• The deadline is November 11, 2016, 23:59.
How I will evaluate your assignment.
• Write your report and your pseudo-code clearly, and present a commented code.
• Be sure to test your code for correctness. I will take into consideration the efficiency of your algorithms.
• I will have a discussion with you about your report and will test your code at the end of the semestre, jointly
with the other assignments.
REFERENCES
[1] L. Gao and J. Rexford, “Stable Internet routing without global coordination,” IEEE/ACM Transactions on Networking, vol. 9, no. 6, pp.
681–692, December 2001.