# ELEC/COMP 447/546 Assignment 4

\$30.00

## Description

Introduction
This assignment will introduce you to PyTorch and neural networks. We have provided a
Colab notebook located here with skeleton code to get you started. Colab comes with a
free GPU. To activate the GPU during your session, click Runtime on the top toolbar,
followed by Change runtime type, and select GPU under hardware accelerator. You will
find the GPU useful for quickly training your neural network in Problem 2.
1.0 PyTorch (10 points)
In this problem, you will perform some basic operations in PyTorch, including creating
tensors, moving arrays between PyTorch and Numpy, and using autograd. Before
1. Tensor basics
2. Autograd basics, these two sections:
1.1 Basics of Autograd (5 points)
a. In the provided notebook, fill in the function sin_taylor() with code to
approximate the value of the sine function using the Taylor approximation
b. Create a tensor x with value π/4 . Create a new tensor y = sin_taylor(x).
Use y.backward() to evaluate the gradient of y at x. Is this value a close
approximation to the exact derivative of sine at x?
c. Now, create a NumPy array x_npy of 100 random numbers drawn uniformly
from [βπ, π] (use np.random.uniform). Create a tensor x from that array and
place the tensor onto the GPU. Again, evaluate y = sin_taylor(x). This
time, y is a vector. If you run y.backward(), it will throw an error because
autograd is meant to evaluate the derivative of a scalar output with respect to
input vectors (see tutorial pages above). Instead, run either one of these two
lines (they do the same thing):
y.sum().backward()
What is happening here? We are creating a βdummyβ scalar output (letβs call it z),
which contains the sum of values in y, and acts as the final scalar output of our
computation graph. Due to the chain rule of differentiation, dz/dx will yield the
same value as dy/dx.
d. Get the gradient tensor dz/dx and convert that tensor to a Numpy array. Plot
dz/dx vs. x_npy, overlaid on a cosine curve. Confirm that the points fall on the
curve and put this plot in your report.
1.2 Image Denoising (5 points)
In this problem, you will denoise this noisy parrot image, which we denote I. To do so,
you will create a denoising loss function, and use autograd to optimize the pixels of a
new image J, which will be a denoised version of I.
a. In your Colab notebook, implement denoising_loss() to compute the
following loss function:
πππ π  = βπΌ β π½β1 + πΌ (β
ππ½
ππ₯ β
1
+ β
ππ½
ππ¦ β
1
)
The first component is a data term making sure that the predicted image J is not
too far from the original image I. The second term is a regularizer which will
reward J if it is smoother, quantified using Jβs spatial derivatives. We have
b. Implement gradient descent to optimize the pixels of J using your loss function
and autograd. Initialize J to be a copy of I. Try different values for the learning
rate and πΌ and find a combination that does a good job. Put the smoothed image
J, along with the learning rate and πΌ you used in your report.
c. ELEC/COMP 546 Only: Change the loss function to use L2 norms instead of L1.
Does it work better or worse? Why?
Hints (you should use all of these in your solution):
β’ torch.clone: performs a deep copy of a tensor
β’ In the code, you will see the statement with torch.no_grad():. Any
statements written within that block will not update the computation graph. Put
your gradient descent step within that block, since that operation should not
update the graph.
β’ Remember to zero out the gradient buffer of J after each step using
β’ Remember to normalize the gradient to a unit vector before using it in your
β’ To plot an image in tensor J using matplotlib, you will have to first detach it from
the computation graph (to not track its gradients), move it from the GPU to the
CPU, and convert to a NumPy array. You can do this in one line with:
J = J.detach().cpu().numpy().
2.0 Training an image classifier (10 points)
In this problem, you will create and train your first neural network image classifier!
networks in PyTorch:
2. Models
3. Training loop
We will be using the CIFAR10 dataset, consisting of 60,000 images of 10 common
classes. Each image is of size 32 x 32 x 3. Download the full dataset as one .npz file
images, y: array of labels (specified as integers in [0,9]), and label_names: list of class
a. Finish implementing the CIFARDataset class. See comments in the code for
further instructions.
b. Add transforms: RandomHorizontalFlip, RandomAffine ([-5, 5] degree
range, [0.8, 1.2] scale range) and ColorJitter ([0.8, 1.2] brightness range,
[0.8, 1.2] saturation range). Donβt forget to apply the ToTensor transform first,
which converts a H x W x 3 image to a 3 x H x W tensor, and normalizes the
pixel range to [0,1]. You will find the transform APIs in this page.
c. Implement a CNN classifier with the structure in the following table. You will find
the APIs for Conv, Linear, ReLU, and MaxPool in this page. The spatial
dimensions of an image should NOT change after a Conv operation (only after
Maxpooling).
Layer Output channels for Conv/output neurons for Linear
3 x 3 Conv + ReLU 50
MaxPool (2 x 2) X
3 x 3 Conv + ReLU 100
MaxPool (2 x 2) X
3 x 3 Conv + ReLU 100
MaxPool (2 x 2) X
3 x 3 Conv + ReLU 100
Linear + ReLU 100
Linear 10
d. Implement the training loop.
e. Train your classifier for 15 epochs. The GPU, if accessible, will result in faster
training. Make sure to save a model checkpoint at the end of each epoch, as you
will use them in part f. Use the following training settings: batch size = 64,
optimizer = Adam, learning rate = 1e-4.
f. Compute validation loss per epoch and plot it. Which model will you choose and
why?
g. Run the best model on your test set and report:
i. Overall accuracy (# of examples correctly classified / # of examples)
ii. Accuracy per class
iii. Confusion matrix: A 10 x 10 table, where the cell at row i and column j
reports the fraction of times an example of class i was labeled by your
model as class j. Please label the rows/columns by the object class name,
not indices.
iv. For the class on which your model has the worst accuracy (part ii), what is
the other class it is most confused with? Show 5-10 test images that your
model confused between these classes and comment on what factors
may have caused the poor performance.
h. ELEC/COMP 546 Only: Change the last two Conv blocks in the architecture to
Residual blocks and report overall accuracy of the best model. Recall that a
residual block has the form:
Submission Instructions
All code must be written using Google Colab (see course website). Every student must
submit a zip file for this assignment in Canvas with 2 items:
1. An organized report submitted as a PDF document. The report should contain all
image results (intermediate and final), and answer any questions asked in this
document. It should also contain any issues (problems encountered, surprises)
you may have found as you solved the problems. Please add a caption for
every image specifying what problem number it is addressing and what it is
showing. The heading of the PDF file should contain:
a. Your name and Net ID.
b. Names of anyone you collaborated with on this assignment.
c. A link to your Colab notebook (remember to change permissions on your
notebook to allow viewers).
2. A pdf copy of your Colab notebook.
Collaboration Policy
I encourage collaboration both inside and outside class. You may talk to other students
for general ideas and concepts, but you should write your own code, answer questions
independently, and submit your own work.
Plagiarism
Plagiarism of any form will not be tolerated. You are expected to credit all sources
explicitly. If you have any doubts regarding what is and is not plagiarism, talk to me.