A1 Memory and Files

$30.00

Category: You will Instantly receive a download link for .zip solution file upon Payment || To Order Original Work Click Custom Order?

Description

5/5 - (5 votes)

Assignment 1: Memory and Files
For this assignment, you’ll write two C programs that manipulate sounds. The first
program, remvocals, removes vocals from stereo sound files; the second, addecho, adds echo to a
mono sound file. You’ll use C commandline-processing, IO, and memory functions.
Sounds are waves of air pressure. When a sound is generated, a sound wave consisting of
compressions (increases in pressure) and rarefactions (decreases in pressure) moves through the
air. This is similar to what happens if you throw a stone into a pond: the water rises and falls in a
repeating wave.
When a microphone records sound, it takes a measure of the air pressure and returns it as a value.
These values are called samples and can be positive or negative corresponding to increases or
decreases in air pressure. Each time the air pressure is recorded, we are sampling the sound. Each
sample records the sound at an instant in time; the faster we sample, the more accurate is our
representation of the sound. The sampling rate refers to how many times per second we sample
the sound. For example, CD-quality sound uses a sampling rate of 44100 samples per second;
sampling someone’s voice for use in a VOIP conversation uses far less than this. Sampling rates of
11025 (voice quality), 22050, and 44100 (CD quality) are common.
For mono sounds (those with one sound channel), a sample is simply a positive or negative integer
that represents the amount of compression in the air at the point the sample was taken. For stereo
sounds, a sample is actually made up of two integer values: one for the left speaker and one for the
right.
Program 1: remvocals.c
For this part, you’ll write a C program to remove vocals from stereo PCM sounds stored in the
canonical wav format. You can read more about this wav format (though this won’t be too helpful
until you get to part 2 of this assignment).
For example, your program will be able to start with a wav file with vocals and produce a wav file
with vocals removed. (Is that Dan at UTM singing? You’ll never know.)The original output wav file
was incorrect and has been replace.
For this part, you will write a program that supports the following synopsis (synopsis just means that
we are telling you the correct way that you program is to be called):
remvocals sourcewav destwav
where sourcewav is the stereo wav sound file that already exists, and destwav is the new stereo
output wav file to create that has vocals removed. That is, your program should take two
commandline parameters: the first is the input wav file, and the second is the output wav file. If
exactly two parameters are not provided, or if one of the files cannot be opened, issue appropriate
errors and terminate. Be sure to open both the input and output files in binary mode.
Here’s how the algorithm works.
 Copy the first 44 bytes from the input file to the output file without changing those bytes. Those
44 bytes contain important header information that should not be modified by your program.
 Next, treat the rest of the input file as a sequence of shorts. Take each pair of
shorts left and right, and compute combined = (left – right) / 2. Write two copies
ofcombined to the output file.
Please use the C stdio block functions (King 22.6) fread and fwrite, not the low-level Unix
functions like read and write. Be sure to include all necessary error-checking.
Why Does This Algorithm Work?
For the curious, a brief explanation of the vocal-removal algorithm is in order. As you noticed from
the algorithm, we are simply subtracting one channel from the other (and then dividing by 2 to keep
the volume from getting too loud). So why does subtracting the left channel from the right channel
magically remove vocals?
When music is recorded, it is sometimes the case that vocals are recorded by a single microphone,
and that single vocal track is used for the vocals in both channels. The other instruments in the song
are recorded by multiple microphones, so that they sound different in both channels. Subtracting one
channel from the other takes away everything that is “in common” between those two channels
which, if we’re lucky, means removing the vocals.
Of course, things rarely work so well. Try your vocal remover on this badly-behaved wav file. Sure,
the vocals are gone, but so is the body of the music! Apparently, some of the instruments were also
recorded “centred”, so that they are removed along with the vocals when channels are subtracted.
Program 2: addecho.c
Listen to this crow and that same crow, with echo. Or this woman saying welcome and that
same welcome, with echo. In both cases, echo is being added to a sound. We want to write a
program that takes an existing wav file and creates a new wav file that has echo added to it. Note
that these two files haven’t changed.
How is echo added? There are two important ideas to understand here:
 Volume: multiplying each sample value by a number greater than 1 increases the volume;
multiplying each sample by a number between 0 and 1 (exclusive) decreases the volume. For
example, multiplying everything by 2 doubles the volume; multiplying everything by 0.5 halves
the volume.
 Mixing: if we mix two sounds together, what we mean is that they play at the same time. Mixing
two sounds involves adding corresponding samples together. For example, if one sound has
three samples: 2, 4, and 6; and another sound has four samples: 10, 11, 12, and 13; mixing
them yields a sound of four samples: 12, 15, 18, and 13.
Suppose we have two parameters: delay and volume_scale. delay tells us how many samples to
wait before mixing-in the echoing copy of the sound with the original copy of the
sound. volume_scale tells us the amount by which to scale down the volume of the echoing copy
of the sound. For example, a setting of 2 for volume_scale means to divide the volume of the
original sound by 2 when producing the echo.
Now we can describe conceptually how to add echo to a sound. We will have two sounds: (1) the
original sound orig, and (2) a new sound echo that has delay samples of value 0, followed by a
volume-scaled version of orig. Mix orig and echo together and output that as a new sound file.
That new sound file will have the echo added to it, and it will have the same number of samples
as echo.
Unfortunately, that technique would require the entire orig and echo sounds to be loaded into
memory. Sound files can be huge, so that technique isn’t advised. Instead, for this assignment, you
are required to do the following:
 Keep only the most recent delay samples of the original sound, scaled by volume, in an echo
buffer.
 When writing the output sound, there are several phases:
o If you are not yet at sample delay, just write the same sample from orig to your
output sound. (Why? Because we can’t start the echo yet!)
o If you are at sample delay or later, start mixing-in the samples from the echo buffer.
o Once you’ve finished reading the original sound, write x 0 samples to the output sound,
where x is delay minus the number of samples in orig. If x is zero or less, do nothing
for this step. (Why are we doing this? Because the original sound might not
have delay samples in it, and we have to wait a total of delay samples before
producing the echo.)
o Finally, write the rest of the echo buffer to the output sound. (Without doing this, the
echoing copy of the sound would be cut off before it finishes.)
For this part, you will write a program that supports the following synopsis:
addecho [-d delay] [-v volume_scale] sourcewav destwav
where delay and volume_scale are as described above, sourcewav is the mono wav sound file
that already exists, and destwav is the new mono output wav file to create that includes the echo.
If -d is not provided, use a default value of 8000; if -v is not provided, use a default value of 4. (Note:
the mono sound files for this part of the assignment have a sampling rate of 22050. This means, for
example, that a delay of 8000 samples causes the echo to start 8000 / 22050 = 0.3628 seconds
after the sound starts.)
You are required to process commandline options using getopt. (man 3 getopt is very helpful;
don’t use just man getopt, because that gives you a shell command, not the C library function we
want. Also, check man 3 strtol for a function that converts strings to integers.)
Remember in remvocals how we wrote the first 44 bytes of the wav file without changing them?
Well, we can’t do that for addecho, because within those 44 bytes are two integers that each tell us
the size of the wav file. We have to increase each of those integers by delay * 2, otherwise they
will not accurately represent the length of the wav files with echo in them! If we number the bytes 0
to 43, then the integers start at bytes 4 and 40 (or shorts 2 and 20), respectively. Be sure to fix both!
Here is a hint for some code that you may want to use:
#define HEADER_SIZE 22
short header[HEADER_SIZE];
/* code omitted that reads from the input file into header */

/* The next line says that we want to treat the memory starting at the
* address header + 2 as if it were an unsigned int */
sizeptr = (unsigned int *)(header + 2);

One more important difference between this addecho program and remvocals: in addecho, we
don’t know the size of the echo buffer until runtime. You are required to use mallocto allocate the
proper amount of memory based on the delay parameter.
More Examples
Here we have a door slamming. It is a sound with 32512 samples in it. (You can tell
because 32512*2 + 44 = 65068 bytes, and that is the size of the wav file in bytes.) Here are
some calls of addecho; in each case, we start with the original door.wav and use
various delay and volume_scale parameters.
The first set of output files are the ones that match the specification:
 addecho -d 12000 -v 4 door.wav new_door_12000_4.wav. File Created
 addecho -d 12000 -v 2 door.wav new_door_12000_2.wav. File Created
 addecho -d 20000 -v 4 door.wav new_door_20000_4.wav. File Created
 addecho -d 35000 -v 2 door.wav new_door_35000_2.wav. File Created
 addecho -d 60000 -v 1 door.wav new_door_60000_1.wav. File Created
The following set of wav files are the original ones that were created with buggy solution code (yell at
Dan). We will accept programs that match these output files, but if you are just getting start on the
assignment, do not use these files.
 addecho -d 12000 -v 4 door.wav door_12000_4.wav. File Created
 addecho -d 12000 -v 2 door.wav door_12000_2.wav. File Created
 addecho -d 20000 -v 4 door.wav door_20000_4.wav. File Created
 addecho -d 35000 -v 2 door.wav door_35000_2.wav. File Created
 addecho -d 60000 -v 1 door.wav door_60000_1.wav. File Created
Here is a very short wav file with only 20 samples that is easier to compare to the expected output.
Running addecho -d 3 -v 2 short.wav short_3_2.wav produces the fileshort_3_2.wav.(This
file is too short to listen to.)
# The first line shows the samples in short.wav
# The second line shows the samples in short_3_2.wav
2 2 2 2 2 8 8 8 8 8 16 16 16 16 16 4 4 4 4 4
2 2 2 3 3 9 9 9 12 12 20 20 20 24 24 12 12 12 6 6 2 2 2
(You should be able to produce similar short files for testing fairly easily.)
Comparing Binary Files
For full marks, the wav files created by your programs must match our sample wav files exactly. Wav
files are binary files, and a useful Unix utility for comparing binary files is cmp. Read the man page
for cmp, especially its -l option. This can tell you whether two files differ and, if they do, the bytes in
the files that do not match. Note that cmp -l outputs byte offsets in decimal but byte values
themselves in octal (find a converter online if you do not know how to convert from octal to decimal).
No Crashes
Your programs should never segfault or crash. For example:
 Be sure to error-check all C library calls, including malloc, fopen, and so on.
 Make sure the user calls your programs correctly; if not, print an informative error message and
exit. In particular, this means that you should not allow incorrect calls of your programs to crash
or even get passed the argument-checks you do.
What to submit
You will commit to your repository in the a1 directory two files: remvocals.c and addecho.c. Only
files with exactly these names will be graded. You may submit additional files (e.g. test files), but
they will not be marked.
Make sure that you’ve done svn add on every file. Check MarkUs, or checkout your repository into
a new directory, to verify that everything is there. There’s nothing we can do if you forget to submit a
file.
Submission checklist:
You can make your life a lot simpler by ensuring that your submission is complete. When you first sit
down to do some work on this assignment, check out the repository, create a file called remvocals.c
with a main function that you can compile without error. Do the same with addecho.c. Then use svn
to add and commit the file to your repo. After you have added these files to svn, you can commit
your work after every time you do some work.
Here is a list of things that you should do at least an hour before the assignment deadline:
 Create a temporary directory in your account (not one that is a subdirectory of your working
directory for your repository).
 Check out your repository into this empty directory to be sure that the correct files have been
committed.
 Run gcc -Wall -g -o remvocals remvocals.c and gcc -Wall -g -o addecho
addecho.c to be sure that both files compile without warnings or error.
 Run a few of the examples shown above and compare the output to be sure that you have
committed the right version of your code.
© 2015 Karen Reid