Description
Programming Assignment 5 – Queues C++
III. Overview & Requirements:
Note: parts of this assignment were inspired by Deitel and Deitel’s Supermarket Simulation problem. We’ve all had the
pleasant experience of standing in line at the grocery store. As I’m standing in line I’m always trying to figure out if I chose
the line with the fastest service. In most cases, I fail miserably. Let’s write a program to simulate two lines in a grocery
store, which will allow us to better understand how to select the fastest line. Note: you’ll be required to write some test
cases for this program. I highly recommend that you start with your tests before you implement any other aspect of the
program. Starting with your tests will also allow for you to better design and implement your main application code.
For this assignment you will need to simulate two lines using queues. This will require that you develop enqueue ( )
(insert), dequeue ( ) (delete), and printQueue ( ) operations for a queue. Although you will instantiate two queues, each
one of these will consist of the same kind of queue nodes. Define a queue node in the following manner:
class Data
{
public: // Member functions
private:
int customerNumber; // Unique identifier; starts at 1; after 24 hours should be reset to 1
int serviceTime; // Random time; varies between express and normal lanes; units in minutes
int totalTime; // totalTime = serviceTime + sum of serviceTimes of customers in line before this
customer; units in minutes
}; // This memory needs to be allocated on the heap!
10/14/2018 Programming Assignment 5 – Queues C++
https://eecs.wsu.edu/~aofallon/cpts122/progassignments/PA5.htm 2/3
class QueueNode
{
public: // Member functions
private:
Data *pData; // The memory for Data will need to be allocated on the heap as well!
QueueNode *pNext;
};
You must also define a queue in the following manner:
class Queue
{
public: // Member functions
private:
QueueNode *pHead;
QueueNode *pTail;
};
One of your queues will represent the express lane and the other a normal lane. You will randomly generate arrival times
and service times of customers into each lane. The express lane has customers arrive every one to five minutes, and
customers arrive every three to eight minutes in the normal lane. Service times vary from one to five minutes, and three to
eight minutes, for express and normal lane customers, respectively. As customers arrive into each line print out a message
indicating in which line each customer arrives, along with the overall corresponding arrival time and customer number.
When customers have finished checking out, print out a message indicating which line the customer was in, along the
corresponding customer number and totalTime in the line. Allow for the simulation to run for n number of minutes,
where n is inputted by the user.
The general program flow is as follows:
1. Generate a random number between 1 – 5 and 3 – 8 for express and normal lanes, respectively. This represents the
arrival time of the first customer into each lane. Set the variable for total time elapsed to 0.
2. As customers arrive into each line, randomly generate a service time for each. Start processing the customers in the
lanes based on service time. Randomly generate the arrival time of the next customer into each line. Elapsed time
should be updated by one unit.
3. As each minute elapses, a new customer may arrive and/or another customer may be done checking out. Display the
appropriate messages as described above.
4. For every 10 minutes, print out the entire queue for each line
5. Repeat steps 2 through 4 for n minutes of simulation.
Hints: since this is a simulation one minute is really one unit of time. Thus, the incrementing of an integer variable could
represent one minute of time elapsing.
Required test cases:
Declare and define a test class for your application. You must declare your test class in a separate .h file from your other
classes. You must also place your test case implementations in a separate .cpp file from your other classes. You must
implement a total of 5 test cases. You must write the following test cases:
– One test case that executes your enqueue() operation on an empty queue
– One test case that executes your enqueue() operation with one node in the queue
– One test case that executes your dequeue() operation on a queue with one node
– One test case that executes your dequeue() operation on a queue with two nodes
– One test case that runs your simulation for 24 hours
BONUS:
Modify QueueNode such that it contains a pointer to the start of a dynamic singly linked list. The linked list will consist of
grocery items corresponding to one person. These items should be strings like “cereal”, “milk”, “steak”, etc. Adjust the
serviceTime of the QueueNode so that it is no longer random, but proportional to the number of items for the person
served.
IV. Submitting Assignments:
Programming Assignment 5 – Queues C++
https://eecs.wsu.edu/~aofallon/cpts122/progassignments/PA5.htm 3/3
1. Using the OSBLE+ MS VS plugin, please submit your solution. Please visit https://github.com/WSUHELPLAB/OSBLE/wiki/Submitting-an-Assignment for more information about submitting using OSBLE+.
2. Your project must contain at least two header files (a .h file) and three C++ source files (which must be .cpp files).
3. Your project must build properly. The most points an assignment can receive if it does not build properly is 65 out of
100.
V. Grading Guidelines:
This assignment is worth 100 points. Your assignment will be evaluated based on a successful compilation and adherence to
the program requirements. We will grade according to the following criteria:
5 pts – Appropriate top-down design, style, and commenting according to class standards
15 pts – Correct usages of two queues in simulation
5 pts – Correct Data class
5 pts – Correct QueueNode class
7 pts – Correct Queue class
10 pts – Correct constructors/destructors for the classes
5 pts – Correct getters/setters for the classes
5 pts – Correct printQueue()
3 pts – Correct isEmpty()
15 pts – Correct enqueue()
15 pts – Correct dequeue()
10 pts (2 pts/test case) – Correct test cases for the application
BONUS: Up to 20 pts for implementation of grocery item list/customer
