## Description

1 Question 1 – Naive Bayes and Logisitic Regression (25 points)

1.1 Naive Bayes with both continuous and boolean variables (10 points)

Consider learning a function X → Y where Y is boolean, where X = (X1, X2), and where X1 is a boolean

variable and X2 a continuous variable. State the parameters that must be estimated to define a Naive Bayes

classifier in this case. Give the formula for computing P(Y |X), in terms of these parameters and the feature

values X1 and X2.

1.2 Naive Bayes and Logistic Regression with Boolean variables (15 points)

In class, we showed that when Y is Boolean and X = (X1, · · · , Xd) is a vector of continuous variables, the

the assumptions of the Gaussian Naive Bayes classifier imply that P(Y |X) is given by the logistic function

with appropriate parameters θ. In particular:

P(Y = 1|X) = 1

1 + exp(−(

Pd

i=1 θiXi + θd+1))

(1)

Consider instead the case where Y is Boolean and X = (X1, · · · , Xd) is a vector of Boolean variables.

Prove for this case also that P(Y |X) follows this same form (and hence that Logistic Regression is also the

discriminative counterpart to a Naive Bayes generative classifier over Boolean features).

2 Question 2 – Support Vector Machines (15 points)

2.1 Linear case (10 points)

Consider training a linear SVM on linearly separable dataset consisting of n points. Let m be the number of

support vectors obtained by training on the entire set. Show that the LOOCV error is bounded above by m

n

.

Hint: Consider two cases: (1) removing a support vector data point and (2) removing a non-support

vector data point.

2.2 General case (5 points)

Now consider the same problem as above. But instead of using a linear SVM, we will use a general kernel.

Assuming that the data is linearly separable in the high dimensional feature space corresponding to the

kernel, does the bound in previous section still hold? Explain why or why not.

3 Question 3 – Implementation of SVMs (40 points)

In this problem, you will implement SVMs using two different optimization techniques:(1) quadratic programming and (2) stochastic gradient descent.

1

3.1 Implement Kernel SVM using Quadratic Programming (15 points)

Quadratic programs refer to optimization problems in which the objective function is quadratic and the

constraints are linear. Quadratic programs are well studied in optimization literature, and there are many

efficient solvers. Many Machine Learning algorithms are reduced to solving quadratic programs. In this

question, we will use the quadratic program solver of Matlab to optimize the dual objective of a kernel

SVM.

The dual objective of kernel SVM can be written as:

maximize

α

Xn

j=1

αj −

1

2

Xn

i=1

Xn

j=1

yiαiyjαjk(xi

, xj ) (2)

s.t. Xn

j=1

yjαj = 0 (3)

0 ≤ αj ≤ C ∀j. (4)

1. (5 points) Write the SVM dual objective as a quadratic program. Look at the quadprog function of

Matlab, and write down what H,f, A, b, Aeq, beq, lb, ub are.

2. Use quadratic programming to optimize the dual SVM objective. In Matlab, you can use the function

quadprog.

3. Write a program to compute w and b of the primal from α of the dual. You only need to do this for

linear kernel.

4. (5 points) Set C = 0.1, train an SVM with linear kernel using trD, trLb in q3 1 data.mat (in

Matlab, load the data using load q3 1 data.mat). Test the obtained SVM on valD, valLb,

and report the accuracy, the objective value of SVM, the number of support vectors, and the confusion

matrix.

5. (5 points) Repeat the above question with C = 100.

3.2 Implement Linear SVM using Stochastic Gradient Descent (25 points)

The objective of a linear SVM can be written as

minimize

w,b

1

2

kwk

2

2 + C

Xn

j=1

L(w, b, xj , yj ) (5)

Here l(w, b, xj , yj ) is the Hinge loss of the j-th instance:

L(w, b, xj , yj ) = max

1 − yj (wT xj + b), 0

By distributing the regularization term to each training instance, we obtain the following equivalent objective:

minimize

w,b

Xn

j=1

1

2n

||w||2 + CL(w, b, xj , yj )

(6)

Let Lj =

1

2n

||w||2 + CL(w, b, xj , yj ). We can use stochastic gradient descent to optimize this objective.

The update rule for w and b with the j-th instance will be

wnew ← wcur − η∂wLj (7)

b

new ← b

cur − η∂bLj (8)

where ∂wLj , ∂bLj denote the sub-gradients of Lj w.r.t. w and b respectively.

Algorithm 1: Stochastic gradient descent for linear SVM

for epoch = 1, 2, · · · , max epoch do

η ← η0/(η1 + epoch) % Update the learning rate

(j1, · · · , jn) = permute(1, · · · , n). % Shuffle the indexes of training data

for k ∈ {1, 2, · · · , n} do

j ← jk

Update w, b using Eqs. (7) & (8)

end

end

1. (5 points) Write the stochastic gradient descent update rules for both w and b in linear SVMs.

2. Implement SGD for linear SVMs given in Algorithm 1. η0, η1 are tunable parameters. Initially start

all the weights at 0.

3. (5 points) Using trD, trLb in q3 1 data.mat as your training set, run 1000 epochs over the

dataset using η0 = 1, η1 = 100 and C = 0.1. Plot the loss in Eq. (5) after each epoch. Compare with

the objective value obtained in 3.1.4.

4. (5 points) Using the w, b learned after 1000 epoches, report:

(a) The prediction error on valD, valLb in q3 1 data.mat (test error)

(b) The prediction error on trD, trLb (training error)

(c) kwk

5. (10 points) Change C to 100 and repeat what you did in the previous two questions. You can tune and

use different values of η0, η1. Report the values of η0, η1 that you used in your answer.

4 Question 4 – SVM for object detection (20 points + 10 bonus points)

In this question, you will train a SVM and use it for detecting human upper bodies in your favorite TV series

The Big Bang Theory. You must you your SVM implementation in either Question 3.1 or 3.2.

To detect human upper bodies in images, we need a classifier that can distinguish between upper-body

image patches from non-upper-body patches. To train such a classifier, we can use SVMs. The training

data is typically a set of images with bounding boxes of the upper bodies. Positive training examples are

image patches extracted at the annotated locations. A negative training example can be any image patch that

does not significantly overlap with the annotated upper bodies. Thus there potentially many more negative

training examples than positive training examples. Due to memory limitation, it will not be possible to use

all negative training examples at the same time. In this question, you will implement hard-negative mining

to find hardest negative examples and iteratively train an SVM.

4.1 Data

Training images are provided in the subdirectory trainIms. The annotated locations of the upper bodies

are given in trainAnno.mat. This file contains a cell structure ubAnno; ubAnno{i} is the annotated

locations of the upper bodies in the i

th image. ubAnno{i} is 4×k matrix, where each column corresponds

to an upper body. The rows encode the left, top, right, bottom coordinates of the upper bodies (the origin of

the image coordinate is at the top left corner).

Images for validation and test are given in valIms, testIms respectively. The annotation file for

test images is not released. We have also extracted some image regions of test images, and the regions are

saved as 64×64 jpeg images in testRegs. Only small portion of these images correspond to upper bodies.

3

4.2 External library

Raw image intensity values are not robust features for classification. In this question, we will use Histogram

of Oriented Gradient (HOG) as image features. HOG uses the gradient information instead of intensities,

and this is more robust to changes in color and illumination conditions. See [1] for more information about

HOG, but it is not required for this assignment.

To use HOG, you will need to install an VL FEAT: http://www.vlfeat.org. This is an excellent

cross-platform library for computer vision and machine learning. However, in this homework, you are only

allowed to use the HOG calculation and visualization function vl hog. In fact, you should not call vl hog

directly. Use the supplied helper functions instead; they will call vl hog.

4.3 Helper functions

To help you, a number of utility functions and classes are provided. The most important functions are in

HW2 Utils.m.

1. Run HW2 Utils.demo1 to see how to read and display upper body annotation

2. Run HW2 Utils.demo2 to display image patches and HOG feature images. Compare HOG features

for positive and negative examples, can you see why HOG would be useful for detect upper bodies?

3. Use HW2 Utils.getPosAndRandomNeg() to get initial training and validation data. Positive

instances are HOG features extracted at the locations of upper bodies. Negative instances are HOG

features at random locations of the images. The data used in Question 3 is actually generated using

this function.

4. Use HW2 Utils.detect to run the sliding window detector. This returns a list of locations and

SVM scores. This function can be used for detecting upper bodies in an image. It can also be used to

find hardest negative examples in an image.

5. Use HW2 Utils.cmpFeat to compute HOG feature vector for an image patch.

6. Use HW2 Utils.genRsltFile to generate result file.

7. Use HW2 Utils.cmpAP to compute the Average Precision for the result file.

8. Use HW2 Utils.rectOverlap to compute the overlap between two rectangular regions. The

overlap is defined as the area of the intersection over the area of the union. A returned detection region

is considered correct (true positive) if there is an annotated upper body such that the overlap between

the two boxes is more than 0.5.

9. Some useful Matlab functions to work with images are: imread, imwrite, imshow, rgb2gray, imresize.

4.4 What to implement?

1. (5 points) Use the training data in HW2 Utils.getPosAndRandomNeg() to train an SVM classifier. Use this classifier to generate a result file (use HW2 Utils.genRsltFile) for validation data.

Use HW2 Utils.cmpAP to compute the AP and plot the precision recall curve. Submit your AP and

precision recall curve (on validation data).

2. Implement hard negative mining algorithm given in Algorithm 2. Positive training data and random

negative training data can be generated using HW2 Utils.getPosAndRandomNeg(). At each

iteration, you should remove negative examples that do not correspond to support vectors from the

negative set. Use the function HW2 Utils.detect on train images to identify hardest negative

4

Algorithm 2: Hard negative mining algorithm

P osD ← all annotated upper bodies

NegD ← random image patches

(w, b) ← trainSVM(P osD, NegD)

for iter = 1, 2, · · · do

A ← All non support vectors in NegD.

B ← Hardest negative examples % Run UB detection and find negative patches that violate

% the SVM margin constraint the most

NegD ← (NegD \ A) ∪ B.

(w, b) ← trainSVM(P osD, NegD)

end

examples and include them in the negative training set. Use HW2 Utils.cmpFeat to compute

HOG feature vectors.

Hints: (1) a negative example should not have significant overlap with any annotated upper body. You

can experiment with different threshold but 0.3 is a good starting point. (2) make sure you normalize

the feature vectors for new negative examples. (3) you should compute the objective value at each

iteration; the objective values should not decrease.

3. (10 points) Run the negative mining for 10 iterations. Assume your computer is not so powerful and so

you cannot add more than 1000 new negative training examples at each iteration. Record the objective

values (on train data) and the APs (on validation data) through the iterations. Plot the objective values.

Plot the APs.

4. (5 points) For this question, you will need to generate a result file for test data using the function

HW2 Utils.genRsltFile. You will need to submit this file to our evaluation sever (https:

//goo.gl/XZuD1x) to receive the AP on test data. Report the AP in your answer file. Important

Note: You MUST use your Stony Brook ID to name your submission file, i.e., your SBU ID.mat

(e.g., 012345679.mat). Your submission will not be evaluated if you don’t use your SBU ID.

5. (10 bonus points) Your submitted result file for test data will be automatically entered a competition

for fame. We will maintain a leader board at https://goo.gl/6pT61E, and the top three entries

at the end of the competition (due date) will receive 10 bonus points. The ranking is based on AP.

You can submit the result as frequent as you want. However, the evaluation server will only evaluate

all submissions three times a day, at 11:00am, 5:00pm, and 11:00pm. The system only keeps the recent

submission file, and your new submission will override the previous ones. Therefore, you have three

chances a day to evaluate your method. The leader board will be updated in 30 minutes after every

evaluation.

You are allowed to use any feature types for this part of the homework. For example, you can use

different parameter settings for HOG feature computation. You can even combine multiple HOG

features. You can also append HOG features with geometric features (e.g., think about the locations

of the upper body). You are allowed to perform different types of feature normalization (e.g, L1,

L2). You can use both training and validation data to train your classifier. You are allowed to use

SVMs, Ridge Regression, Lasso Regression, or any technique that we have covered. You can run hard

negative mining algorithm for as many iterations as you want, and the number of negative examples

added at each iteration is not limited by 1000.

5

5 What to submit?

5.1 Blackboard submission

You will need to submit both your code and your answers to questions on Blackboard. Do not submit the

provided data. Put the answer file and your code in a folder named: SUBID FirstName LastName (e.g.,

10947XXXX heeyoung kwon). Zip this folder and submit the zip file on Blackboard. Your submission must

be a zip file, i.e, SUBID FirstName LastName.zip. The answer file should be named: answers.pdf, and it

should contain:

1. Answers to Question 1 and 2

2. Answers to Question 3.1 and 3.2, including the requested plots.

3. Answers to Question 4.3, including the requested plots.

5.2 Prediction submission

For Questions 4.4.4, 4.4.5 you must submit a .mat file to get the AP through https://goo.gl/XZuD1x.

A submission file can be automatically generated by HW2 Utils.genRsltFile.

6 Cheating warnings

Don’t cheat. You must do the homework yourself, otherwise you won’t learn. You must use your SBU ID

as your file name for the competition. Do not fake your Stony Brook ID to bypass the submission limitation

per 24 hours. Doing so will be considered cheating.

References Cited

[1] N. Dalal and B. Triggs. Histograms of oriented gradients for human detection. In Proceedings of the

IEEE Conference on Computer Vision and Pattern Recognition, 2005.

6