Description
CMPE322 project series is a set of projects that teaches how to construct an operating
system, named BUnix (written in institutional colors of Boğaziçi University ), from scratch. In the
first project, you scheduled processes which are independent from each other. In the second project,
you synchronized them with binary semaphores. In this project, you will implement a mechanism for
your operating system in order to handle the I/O based operations.
Scenario in the Third Project
BUnix manages a hardware which have two printers and one hard-drive. You inform your
BUnix coders that if they need to use a printer, they have to write “dispM_[Printer_No]” in which
Printer_No is 0 or 1. Also, if they want to read a block from the hard-drive, they have to write
“readM_[Block_No] in which Block_No is from 0 to 1000. After all, they compile their new codes
which look like in Table 1.
INSTRUCTION NAME INSTRUCTION EXECUTION TIME (ms)
instruction_1 20
instruction_2 20
dispM_0 120
instruction_3 50
instruction_4 20
dispM_1 150
readM_28 120
instruction_5 30
instruction_6 30
readM_854 100
instruction_7 30
.
.
.
.
.
.
exit 10
Table 1 – A Text Based Program Code File Example
CPU Bound vs. I/O Bound
In the previous projects, we always run the CPU-bound processes that need to use the available CPU
power to complete their instructions. However, in this project the processes also run the instructions
that do not need CPU power but have to wait the peripherals (printers and hard-drive) to complete
their tasks. When the processes run these instructions, you have to send these processes to the
corresponding wait queues until their tasks are completed by the peripherals.
In addition to your previous code, we want you to implement the following parts in your third
project:
Implement a wait queue for each printer and for the hard-drive (three wait queues in total).
These wait queues should be a FIFO again.
Implement “dispM” operation:
o You have to send the process to the corresponding wait queue.
o The process at the head of the queue should be sent back to the tail of the ready
queue after the “instruction execution time”, which is given in the second column of
the dispM command.
o The other processes in the wait queue should wait the processes ahead of them
(FIFO Queue).
o When a process reaches to the head of the wait queue, you have to count down the
“instruction execution time” before sending back it to the tail of the ready queue.
Implement “readM” operation:
o Implementation of this operation is similar with the “dispM”.
o However, we have a cache in the memory region which can store 2 blocks.
o At the initial step, the cache area is empty.
o First you have to check whether the “block_no” is available in the cache area.
o If so, you should not send the process in the wait queue of hard-drive. The execution
time of the “readM” is 0 if it is in the cache. You can run the following instruction of
the process.
o Otherwise, you have to send the process to the wait queue of the hard-drive. Then,
operate the queue similar as the “dispM” command. The “instruction execution
time” is given in the second column of the “readM” command.
o Do not forget to update the cache. The replacement in the cache is “Least Recently
Used” (LRU) basis. You have to overwrite the new block on the least recently used
block.
An output mechanism that generates a file to show the ready queue. Ready queue output
name should be “output.txt” again. You should display the queue only at the “context
switch” time. Do not print if the following events is occurred without “context switch”:
o If a new process is arrived to the queue.
o If a process is arrived from a wait queue.
An output mechanism that generates files for the wait queues whenever they are changed by
the algorithm.
Wait queue output names should be:
o First printer (DispM_0): “output_10.txt”
o Second printer (DispM_1): “output_11.txt”
o Hard drive (ReadM_X): “output_12.txt”
The format of the files should be the same as the previous projects.
Notes
In our test definition files:
o P1 will always arrive at time 0
o Process arrival times will increase in each row.
o There will be always a process in the ready queue according to test definition files. So
you don’t have to worry about what to do in “idle CPU” state.
If more than one process needs to add the ready queue at the same time, the priority is:
o The process from the wait of the First printer
o The process from the wait of the Second Printer
o The process from the wait of the Hard-Drive
o New Arrived Process
o The Previous Running Process
Do not forget that the instructions are atomic operations! You could not change the queues
while you are running an instruction. For example:
o Assume that P2 runs “dispM_0 40” at 280. There is not any process in the wait queue
of printer 0. Hence, the printing operation will finish at 320.
o P1 starts to run “instr3 70” at 280. The operation will finish at 350. Therefore, you
have to dequeue P2 from the queue of dispM_0 and send back it to the ready queue
at 350.
If you could not complete the second project, you don’t have to implement it in this project.
We will not test your code file with “waitS” and “signS” commands.
Development Platform
You have to implement your design in the Linux Platform with GCC/G++ Compiler. We
strongly advise you to install Ubuntu which has pre-installed GCC/G++ compiling tools. We will test
your code in this platform and if your compiled code is not compatible with the test platform, you
might be invited for a demo, if necessary.
Provided Files
The following files are given together with the project:
The process definition file (number of processes and their arrival times will be modified
to test your code).
Four program code files (number of instructions, their names and their execution times
will be modified to test your code. Only exception is the last instruction name is always
“exit” and its execution time is 10 milliseconds).
The expected output file.
Project Requirements
Your project should have generated the expected output file for modified process definition
file and program code files. (80%)
The source code documentation. The documentation depends on your design style but at
least having comments that explain your code is strongly advised. (20%)
