Description
This project will have you implement a version of Conway’s Game of Life. It will help you prepare
for the final project, an implementation of Tetris, by familiarizing you with some of the basic Tetris
framework. You may work with a partner, but you must each submit your own solution (no copying
or cheating allowed).
To begin, please visit the course webpage and download the code template to the same directory
where you have saved the file graphics.py. All the places where you will need to add code have
a comment ‘‘YOUR CODE HERE’. At the end of the project, you should have code in all the
places where you find this comment. Note we have coded the Block and Board classes such that
you don’t have to think in pixels. The Block init method takes care of sizing the block to the
pixels specified in the global variable BLOCK SIZE and placing it on the grid. Thus, you only need
to think of the board as a grid of size BOARD WIDTH by BOARD HEIGHT. Remember that square (0,0)
will be in the top left corner, with square (10,10) in the bottom right.
Read through the provided code, and understand the above paragraph, before progressing
any further! Whenever you get template code, it is essential you read through it before coding
that way, you understand what is going on, and what classes and methods are available to you.
Ask an LA if you don’t’ understand aspects of the code.
1
1. A block for each square
In the init method of the Board class, you need to finish laying out the board. Currently, only
the board is drawn. We wish to make a Block to each square on the board, and store that Block in
a dictionary (self.block list). Remember from Exercise 4.3 that Blocks can be any color listed
in rgb.txt! Read the comments in the code and think about the best way to do this. Note that
you just want to create the Block; you do not want to set it to live! Also, be sure to delete the
raise Exception line.
Before continuing, test if your implementation works. Find the section RUNNING THE
SIMULATION, and make sure the code underneath PART 1 is uncommented. Run the code, and
if everything works, the board should pop up with random squares colored in.
2. Adding specific tiles
Now we wish to be able to seed the board with specific patterns of tiles. It’s your job to implement
the seed method of the Board class, which takes in a Python list of block coordinate tuples
something like [(x1, y1), (x2, y2)] and sets the Blocks in those positions to be live. If you get
stuck, review the implementation of random seed to see how we can get the blocks to be visible on
the board; however, you should not use the same for loop that random seed uses hint: your loop
should involve the parameter block coords…
Before continuing, test if your implementation works. Comment the random seed method
and uncomment the code underneath PART 2. If everything works, one phase of the Toad pattern
(found on the Wikipedia page) should appear.
3. Finding our neighbors!
For part 4, you’ll need a way of figuring out the neighboring Blocks bfor any given Block. Y ’
need to implement the method get block neighbors in the Board class. This method takes in a
Block object, and should return a Python list of neighboring blocks. Neighbors can be horizontally,
vertically, or diagonally adjacent so a block in the center of the board would have 8 neighbors,
while one in a corner would only have 3. There are many ways of approaching this problem, so
take a few minutes to devise a good algorithm, and then try to implement it.
Comment the code under PART 2 and uncomment the two lines under PART 3. If everything
works, squares at positions (0,0) and (1,1) should appear colored in, and your Python interpreter
should print “Passed neighbor test”.
2
fi
fi
ou’ll
4. Adding the rules
Now it is time to actually code in the rules of the Game, within the simulate method. Note the
rules are as follows:
1. Any live cell with fewer than two live neighbours dies, as if caused by underpopulation.
2. Any live cell with more than three live neighbours dies, as if by overcrowding.
3. Any live cell with exactly two or three live neighbours lives on to the next generation.
4. Any dead cell with exactly three live neighbours becomes a live cell, as if by reproduction.
It is easiest to do this in two discrete steps, although you may try any approach that you would
like. The first fi s step is to go through the board’s’ blocks and calculate the new status attribute of
each block ie, the status the blocks need to change to and save the calculated status in the
new status attribute. The second step is to go through the blocks again and set them to ’live’ or
’dead’ (the calculated new status accordingly. Run the provided reset status method on each
Block to reset its status (read through that method and understand what it does before using it).
We encourage you to break up this task into a few smaller functions, that you can more easily
debug. Think about what parts you can separate into smaller methods.
Comment the code under PART 3 and uncomment the two lines under PART 4. If everything
works, the Toad pattern should appear, and two seconds later, it should shift phase. MAKE SURE
THIS WORKS BEFORE CONTINUING!
5. Running the animation!
Congrats, you’re seconds away from being done! Comment out the line that says win.after(2000,
board.simulate), and uncomment the code underneath PART 5. Now, run your code. Your
simulation should animate as expected! Try seeding the board with some of the different blocklists
in the GLOBAL VARIABLES section, try randomly seeding the board, and try making up your
own blocklists! Let us know if you fifind anything cool.
3
4
