EECS-4415M Big Data Systems Project #3 Scan

The Stream

In this case, the “stream” will be a table. Your query will go through the table effectively in a single scan, computing the running aggregate of average for each group. A database engine, of course, can do more complicated things: sorting the table various times, making multiple passes, etc. And we could set things up to stream data into a query for the database engine to handle, rather than have the query operate over a table. We aim to write our query and user-defined aggregate in such a way that the query is executed in a purely pipelined way, needing to scan the table only a single time.

Let us define the table for the assignment as

create table Stream (
    id      int,
    grp     int,
    measure int,
    constraint streamPK
        primary key (id),
    constraint idNotNeg
        check (id >= 0),
    constraint grpNotNeg
        check (grp >= 0)
);

The table Stream will be populated with tuples with id‘s ascending, starting with 0. These are like timestamps for the arrival of the tuples. Adjacent tuples may be in the same group (grp). E.g.,

insert into Stream (id, grp, measure)
values
    ( 0, 0,  2),
    ( 1, 0,  3),
    ( 2, 1,  5),
    ( 3, 1,  7),
    ( 4, 1, 11),
    ( 5, 0, 13),
    ( 6, 0, 17),
    ( 7, 0, 19),
    ( 8, 0, 23),
    ( 9, 2, 29),
    (10, 2, 31),
    (11, 2, 37),
    (12, 5, 41),
    (13, 3, 43);

Of course, Stream could be very large. A “group“ of tuples are all adjacent tuples by id with the same grp value. Thus, there are six groups above. (Group value 0 is used twice, but for two different groups; group value 1 breaks the adjacency of 0‘s.) The grp values are just labels, so the order of the grp labels is immaterial (unlike the id‘s). And, of course, a single group’s sequence can be arbitrarily long.

We want to report for each tuple in the stream the running average of measure in its group. For the first tuple of a group, the average is just that tuple’s measure value itself. For the second tuple of the group, it is the average of the first and second tuples’ measure values. And so forth.

Run on Stream above, our SQL “stream-processing program” should produce the answer table

 id | grp | measure |     average      
----+-----+---------+------------------
  0 |   0 |       2 |                2
  1 |   0 |       3 |              2.5
  2 |   1 |       5 |                5
  3 |   1 |       7 |                6
  4 |   1 |      11 | 7.66666666666667
  5 |   0 |      13 |               13
  6 |   0 |      17 |               15
  7 |   0 |      19 | 16.3333333333333
  8 |   0 |      23 |               18
  9 |   2 |      29 |               29
 10 |   2 |      31 |               30
 11 |   5 |      37 |               37
 12 |   3 |      41 |               41
 13 |   3 |      43 |               42
(14 rows)

PostgreSQL on Prism

We run a Postgres server named db in Prism. You are welcome to use it for this assignment.

Each student in the class has had an account created on db. A student’s db account name is the same as their Prism account name. The password has been set as the student’s student ID.

Resources:

• PostgreSQL on Prism
  • psql: PostgreSQL’s shell client:
    a guide to using psql with Prism‘s db
  • Tutorial Video for using PostgreSQL on PRISM

Setting up your own PostgreSQL Server

You are welcome to install Postgres on your own machine — or may have already — and use that for the assignment.

Just ensure that your solution works either in the containerized version as above or on db, the PostgreSQL server on Prism, before submitting it.

Requirements

We want to ensure that our approach is pipelined. That is, Stream can be processed in a single pass. And second, we have to compute the running average in a safe way.

Thus, there are two things to avoid:

1. anything in the query that would force multiple passes (e.g., group by or partition by);
2. potential overflow computing the running average.

There is a 20% penalty each for violating these!

For the first, it is easy to be safe. Just stick closely to the “template” query in the example.

For the second, we want to compute the running average in such a way that we would not run into overflow problems or bad error accumulation for long running averages.

Computing mean incrementally

The “standard” way to accumulate the running mean (average) step by step would be to know the running sum — the sum of the numbers (x1,x2,…) that we have seen so far — and the running count — how many numbers we have seen so far — at given step i. For the running sum:

We set s0=0 to start things off. Our count is just i. For our state at step i, we need to keep si and i. Then, the mean at step i is si/i.

However, imagine that our sequence is very long. The sum could grow to be very large, so large that we would overflow our int register.

Instead, we can calculate the mean, mi, directly (for i>0) at each step. (Let m0=0.)

Note that, in this case, for our state at step i, we need to keep mi and i. This looks better; it is a clear formulation for iteratively computing the average. But it really does nothing to address our overflow issue. Let us reformulate then.

Now, it is not a problem.

User-defined aggregate functions

A user-defined aggregate function needs two functions defined.

1. a state functionThis is called for each tuple iteratively that is part of the aggregation. it takes two arguments: a. state b. value

   The value is from the tuple, and is what we are aggregating with respect to. The state is an internal value, or record of values (accomplished via a composite type), used for the aggregate to hold information it needs.

   The return value of the state function is a new state.

2. a final functionThis extracts from the state the aggregate value representing the aggregation for return.

   It takes one argument: state.

   Note that the return value (the aggregate) must be the same type as what the aggregate function is aggregating over.

This last bit about the return type needing to be the same as the type that is being aggregated over is not always so convenient. Note that, for this assignment, the running average is over integer, but it returns a float for the aggregation value. To accommodate this, feel free to cast the integer measure to float, and write your aggregate function in terms of float.

OLAP SQL

The SQL standards include what are often called the “OLAP” extensions. These include window aggregation. What window aggregation allows one to do is to compute an aggregate per tuple with respect to a neighbourhood of that tuple. These are incredibly powerful extensions to SQL. For those interested to see more, look over Graeme Birchall’s SQL Cookbook, which is superb. His manual is for IBM DB2, but the SQL is standard, and so applies to Postgres too.

This is convenient in that one does not need to do an aggregation with respect to a group by, and then to join the results back with the initial “table”. In fact, a join could be fatal for our application; it could break the pipeline.

We can use window aggregation to “look” at the tuple before (or after) the “current” tuple to check its value (with respect to to some ordering of the tuples, order by id here). For instance, we can use this to see whether the current tuple is in the same group (grp) as the previous tuple. The example for running sum below uses this technique.

Create the stream

We mimic a stream with a table named Stream.

create table Stream (
    id      int,
    grp     int,
    measure int,
    constraint streamPK
        primary key (id),
    constraint idNotNeg
        check (id >= 0),
    constraint grpNotNeg
        check (grp >= 0)
);

And populate it with an simple example stream.

insert into Stream (id, grp, measure)
values
    ( 0, 0,  2),
    ( 1, 0,  3),
    ( 2, 1,  5),
    ( 3, 1,  7),
    ( 4, 1, 11),
    ( 5, 0, 13),
    ( 6, 0, 17),
    ( 7, 0, 19),
    ( 8, 0, 23),
    ( 9, 2, 29),
    (10, 2, 31),
    (11, 5, 37),
    (12, 3, 41),
    (13, 3, 43);

(Yes, this is the very same as above in §Pipeline ¶The Stream.)

You can, of course, test your code with a much longer stream. But you need not get carried away. A small sample run like this suffices.

The user-defined aggregate function

Running-sum‘s aggregate function uses a composite type as the type being aggregated over.

create type intRec as (
    number  int,
    restart boolean
);

The field number is the mesure we are summing. The field restart indicates whether this is the start of a tuple group.

The state function then is

create function runningSum_state(int, intRec)
returns int
language plpgsql
as $f$
    declare i alias for $1;
    declare a alias for $2;
    declare j int;
    begin
        if a.restart or i is null then
            j := a.number;
        elsif a.number is null then
            j := i;
        else
            j := a.number + i;
        end if;
        return j;
    end
$f$;

The aggregate function’s internal state in this case is simply and integer (int). It holds the sum up through the present tuple.

The final function converts the state into an intRC. Recall that the output type of an aggregator has to be the same as the type being aggregated. For this, the value of the restart flag is immaterial.

create function runningSum_final(int)
returns intRec
language sql
as $f$
    select cast(($1, false) as intRec);
$f$;

Finally, the aggregate function is declared.

create aggregate runningSum(intRec) (
    sfunc     = runningSum_state,
    stype     = int,
    finalfunc = runningSum_final
);

The field stype is declaring the type of the internal state.

The SQL query that pipelines Stream to compute the running sum is done as follows.

with
    -- look at the neighbour tuple to the left to fetch its grp value
    CellLeft (id, grp, measure, lft) as (
        select  id,
                grp,
                measure,
                coalesce(
                    max(grp) over (
                        order by id
                        rows between
                        1 preceding
                            and
                        1 preceding ),
                    -1 )
        from Stream
    ),
    -- determine whether current tuple is start of a group
    CellStart(id, grp, measure, start) as (
        select  id,
                grp,
                measure,
                cast(
                    case
                    when grp = lft then 0
                    else                1
                    end
                as boolean)
        from CellLeft
    ),
    -- bundle the measure and start-flag into an intRC
    CellFlag(id, grp, intRC) as (
        select  id,
                grp,
                cast((measure, start) as intRec)
        from CellStart
    ),
    -- call our runningSum aggregator
    CellRun(id, grp, measure, runningRC) as (
        select  id,
                grp,
                (intRC).number,
                runningSum(intRC)
                    over (order by id)
        from CellFlag
    ),
    -- extract the running sum from the composite
    CellAggr(id, grp, measure, running) as (
        select  id,
                grp,
                measure,
                (runningRC).number
        from CellRun
    )
-- report
select id, grp, measure, running
from CellAggr
order by id;

Submit

Use the “submit” command on a PRISM machine to turn in your program.

% submit 4415 scan runningAvg.sql

Due: before midnight Monday 1 March.