Description
1 Introduction
The increasing importance of the web as a medium for electronic and business
transactions has served as a driving force for the development of recommender
systems technology. An important catalyst in this regard is the ease with which
the web enables users to provide feedback about their likes or dislikes. The basic idea of recommender systems is to utilize these user data to infer customer
interests. The entity to which the recommendation is provided is referred to as
the user, and the product being recommended is referred to as an item.
The basic models for recommender systems works with two kinds of data:
1. User-Item interactions such as ratings
2. Attribute information about the users and items such as textual profiles
or relevant keywords
Models that use type 1 data are referred to as collaborative filtering methods,
whereas models that use type 2 data are referred to as content based methods. In
this project, we will build recommendation system using collaborative filtering
methods.
2 Collaborative filtering models
Collaborative filtering models use the collaborative power of the ratings provided by multiple users to make recommendations. The main challenge in designing collaborative filtering methods is that the underlying ratings matrices
are sparse. Consider an example of a movie application in which users specify
ratings indicating their like or dislike of specific movies. Most users would have
viewed only a small fraction of the large universe of available movies and as a
result most of the ratings are unspecified.
The basic idea of collaborative filtering methods is that these unspecified ratings can be imputed because the observed ratings are often highly correlated
across various users and items. For example, consider two users named John and
Molly, who have very similar tastes. If the ratings, which both have specified,
are very similar, then their similarity can be identified by the filtering algorithm.
In such cases, it is very likely that the ratings in which only one of them has
1
specified a value, are also similar. This similarity can be used to make inferences
about incompletely specified values. Most of the collaborative filtering methods
focuses on leveraging either inter-item correlations or inter-user correlations for
the prediction process.
In this project, we will implement and analyze the performance of two types of
collaborative filtering methods:
1. Neighborhood-based collaborative filtering
2. Model-based collaborative filtering
3 MovieLens dataset
In this project, we will build a recommendation system to predict the ratings
of the movies in the MovieLens dataset. The dataset can be downloaded using
the following link:
http://files.grouplens.org/datasets/movielens/ml-latest-small.zip
Although the dataset contains movie genre information, we will only use the
movie rating information in this project. For the subsequent discussion, we
assume that the ratings matrix is denoted by R, and it is an m × n matrix
containing m users (rows) and n movies (columns). The (i, j) entry of the matrix is the rating of user i for movie j and is denoted by rij . Before moving on
to the collaborative filter implementation, we will analyze and visualize some
properties of this dataset.
Question 1: Compute the sparsity of the movie rating dataset, where sparsity is defined by equation 1
Sparsity =
Total number of available ratings
Total number of possible ratings (1)
Question 2: Plot a histogram showing the frequency of the rating values. To
be specific, bin the rating values into intervals of width 0.5 and use the binned
rating values as the horizontal axis. Count the number of entries in the ratings
matrix R with rating values in the binned intervals and use this count as the
vertical axis. Briefly comment on the shape of the histogram
Question 3: Plot the distribution of the number of ratings received among
movies. To be specific, the X-axis should be the movie index ordered by decreasing frequency and the Y -axis should be the number of ratings the movie
has received. For example, the movie that has the largest number of ratings has
index 1; ties can broken in any way. A monotonically decreasing curve instead
of a histogram is expected.
Question 4: Plot the distribution of ratings among users. To be specific, the
2
X-axis should be the user index ordered by decreasing frequency and the Y -axis
should be the number of movies the user have rated. The requirement of the
plot is similar to that in Question 3.
Question 5: Explain the salient features of the distribution found in question 3
and their implications for the recommendation process.
Question 6: Compute the variance of the rating values received by each movie.
Then, bin the variance values into intervals of width 0.5 and use the binned variance values as the horizontal axis. Count the number of movies with variance
values in the binned intervals and use this count as the vertical axis. Briefly
comment on the shape of the histogram
4 Neighborhood-based collaborative filtering
The basic idea in neighborhood-based methods is to use either user-user similarity or item-item similarity to make predictions from a ratings matrix. There
are two basic principles used in neighborhood-based models:
1. User-based models: Similar users have similar ratings on the same item.
Therefore, if John and Molly have rated movies in a similar way in the
past, then one can use John’s observed ratings on the movie Terminator
to predict Molly’s rating on this movie.
2. Item-based models: Similar items are rated in a similar way by the same
user. Therefore, John’s ratings on similar science fiction movies like Alien
and Predator can be used to predict his rating on Terminator.
In this project, we will only implement user-based collaborative filtering (implementation of item-based collaborative filtering is very similar).
4.1 User-based neighborhood models
In this approach, user-based neighborhoods are defined in order to identify similar users to the target user for whom the rating predictions are being computed.
In order to determine the neighborhood of the target user u, her similarity
to all the other users is computed. Therefore, a similarity function needs to
be defined between the ratings specified by users. In this project, we will use
Pearson-correlation coefficient to compute the similarity between users.
4.2 Pearson-correlation coefficient
Pearson-correlation coefficient between users u and v, denoted by Pearson(u,v),
captures the similarity between the rating vectors of users u and v. Before stating the formula for computing Pearson(u,v), let’s first introduce some notation:
Iu : Set of item indices for which ratings have been specified by user u
Iv : Set of item indices for which ratings have been specified by user v
µu: Mean rating for user u computed using her specified ratings
ruk: Rating of user u for item k
3
Question 7: Write down the formula for µu in terms of Iu and ruk
Question 8: In plain words, explain the meaning of Iu ∩ Iv. Can Iu ∩ Iv = ∅
(Hint: Rating matrix R is sparse).
Then, with the above notation, the Pearson-correlation coefficient between users
u and v is defined by equation 2:
P earson(u, v) =
P
k∈Iu∩Iv
(ruk − µu)(rvk − µv)
qP
k∈Iu∩Iv
(ruk − µu)
2
qP
k∈Iu∩Iv
(rvk − µv)
2
(2)
4.3 k-Nearest neighborhood (k-NN)
Having defined similarity metric between users, now we are ready to define
neighborhood of users. k-Nearest neighbor of user u, denoted by Pu, is the set
of k users with the highest Pearson-correlation coefficient with user u.
4.4 Prediction function
We can now define the prediction function for user-based neighborhood model.
The predicted rating of user u for item j, denoted by ˆruj , is given by equation
3
rˆuj = µu +
P
v∈Pu
P earson(u, v)(rvj − µv)
P
v∈Pu
|P earson(u, v)|
(3)
Question 9: Can you explain the reason behind mean-centering the raw ratings (rvj − µv) in the prediction function? (Hint: Consider users who either
rate all items highly or rate all items poorly and the impact of these users on
the prediction function)
4.5 k-NN collaborative filter
The previous sections have equipped you with the basics needed to implement
a k-NN collaborative filter for predicting ratings of the movies. Although, we
have provided you with the equations needed to write a function for predicting
the ratings but we don’t require you to write it. Instead, you can use the built-in
python functions for prediction.
4.5.1 Design and test via cross-validation
In this part of the project, you will design a k-NN collaborative filter and test
it’s performance via 10-fold cross validation. In a 10-fold cross-validation, the
dataset is partitioned into 10 equal sized subsets. Of the 10 subsets, a single
subset is retained as the validation data for testing the filter, and the remaining
9 subsets are used to train the filter. The cross-validation process is then repeated 10 times, with each of the 10-subsets used exactly once as the validation
4
data.
Question 10: Design a k-NN collaborative filter to predict the ratings of the
movies in the MovieLens dataset and evaluate it’s performance using 10-fold
cross validation. Sweep k (number of neighbors) from 2 to 100 in step sizes of
2, and for each k compute the average RMSE and average MAE obtained by
averaging the RMSE and MAE across all 10 folds. Plot average RMSE (Y-axis)
against k (X-axis) and average MAE (Y-axis) against k (X-axis).
The functions that might be useful for solving question 10 are described in
the documentation below
http://surprise.readthedocs.io/en/stable/knn_inspired.html
http://surprise.readthedocs.io/en/stable/model_selection.html#surprise.
model_selection.validation.cross_validate
For question 10, use Pearson-correlation function as the similarity metric. You
can read about how to specify the similarity metric in the documentation below:
http://surprise.readthedocs.io/en/stable/similarities.html
Question 11: Use the plot from question 10, to find a ’minimum k’. Note: The
term ’minimum k’ in this context means that increasing k above the minimum
value would not result in a significant decrease in average RMSE or average
MAE. If you get the plot correct, then ’minimum k’ would correspond to the
k value for which average RMSE and average MAE converges to a steady-state
value. Please report the steady state values of average RMSE and average MAE
4.6 Filter performance on trimmed test set
In this part of the project, we will analyze the performance of the k-NN collaborative filter in predicting the ratings of the movies in the trimmed test set.
The test set can be trimmed in many ways, but we will consider the following
trimming:
• Popular movie trimming: In this trimming, we trim the test set to contain
movies that have received more than 2 ratings. To be specific, if a movie
in the test set has received less than or equal to 2 ratings in the entire
dataset then we delete that movie from the test set and do not predict the
rating of that movie using the trained filter.
• Unpopular movie trimming: In this trimming, we trim the test set to
contain movies that have received less than or equal to 2 ratings. To be
specific, if a movie in the test set has received more than 2 ratings in
the entire dataset then we delete that movie from the test set and do not
predict the rating of that movie using the trained filter.
• High variance movie trimming: In this trimming, we trim the test set to
contain movies that have variance (of the rating values received) of at least
2 and has received at least 5 ratings in the entire dataset. To be specific,
5
if a movie has variance less than 2 or has received less than 5 ratings in
the entire dataset then we delete that movie from the test set and do not
predict the rating of that movie using the trained filter.
Having defined the types of trimming operations above, now we can evaluate
the performance of the k-NN filter in predicting the ratings of the movies in the
trimmed test set.
Question 12: Design a k-NN collaborative filter to predict the ratings of the
movies in the popular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Sweep k (number of neighbors) from 2 to 100 in
step sizes of 2, and for each k compute the average RMSE obtained by averaging
the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k (X-axis).
Also, report the minimum average RMSE
Question 13: Design a k-NN collaborative filter to predict the ratings of the
movies in the unpopular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Sweep k (number of neighbors) from 2 to 100 in
step sizes of 2, and for each k compute the average RMSE obtained by averaging
the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k (X-axis).
Also, report the minimum average RMSE
Question 14: Design a k-NN collaborative filter to predict the ratings of the
movies in the high variance movie trimmed test set and evaluate it’s performance using 10-fold cross validation. Sweep k (number of neighbors) from 2 to
100 in step sizes of 2, and for each k compute the average RMSE obtained by
averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k
(X-axis). Also, report the minimum average RMSE
We provide you with the following hints that will help you solve questions 12,13,
and 14:
• For each value of k, split the dataset into 10 pairs of training and test sets
(trainset 1, testset 1), (trainset 2, testset 2), . . . , (trainset 10, testset 10)
The following documentation might be useful for the splitting:
http://surprise.readthedocs.io/en/stable/getting_started.html#
use-cross-validation-iterators
• For each pair of (trainset, testset):
– Train the collaborative filter on the train set
– Write a trimming function that takes as input the test set and outputs
a trimmed test set
– Predict the ratings of the movies in the trimmed test set using the
trained collaborative filter
– Compute the RMSE of the predictions in the trimmed test set
• Compute the average RMSE by averaging across all the 10 folds
6
4.6.1 Performance evaluation using ROC curve
Receiver operating characteristic (ROC) curve is a commonly used graphical
tool for visualizing the performance of a binary classifier. It plots the true positive rate (TPR) against the false positive rate (FPR).
In the context of recommendation systems, it is a measure of the relevance
of the items recommended to the user. Since the observed ratings are in a continuous scale (0-5), so we first need to convert the observed ratings to a binary
scale. This can be done by thresholding the observed ratings. If the observed
rating is greater than the threshold value, then we set it to 1 (implies that the
user liked the item). If the observed rating is less than the threshold value, then
we set it to 0 (implies that the user disliked the item). After having performed
this conversion, we can plot the ROC curve for the recommendation system in
a manner analogous to that of a binary classifier.
Question 15: Plot the ROC curves for the k-NN collaborative filter designed
in question 10 for threshold values [2.5, 3, 3.5, 4]. For the ROC plotting use the
k found in question 11. For each of the plots, also report the area under the
curve (AUC) value.
For the ROC plotting, split the dataset into 90% for training and 10% for
testing. For solving question 15 the functions described in the documentation
below might be useful
http://scikit-learn.org/stable/modules/generated/sklearn.metrics.roc_
curve.html
5 Model-based collaborative filtering
In model-based collaborative filtering, models are developed using machine
learning algorithms to predict users’ rating of unrated items. Some examples of
model-based methods include decision trees, rule-based models, bayesian methods, and latent factor models. In this project, we will explore latent factor based
models for collaborative filtering.
5.1 Latent factor based collaborative filtering
Latent factor based models can be considered as a direct method for matrix
completion. It estimates the missing entries of the rating matrix R, to predict
what items a user will most probably like other than the ones they have rated.
The basic idea is to exploit the fact that significant portions of the rows and
columns of the rating matrix are correlated. As a result, the data has builtin redundancies and the rating matrix R can be approximated by a low-rank
matrix. The low-rank matrix provides a robust estimation of the missing entries.
The method of approximating a matrix by a low-rank matrix is called matrix
factorization. The matrix factorization problem in latent factor based model
can be formulated as an optimization problem given by 4
7
minimize
U,V
Xm
i=1
Xn
j=1
(rij − (UV T
)ij )
2
(4)
In the above optimization problem, U and V are matrices of dimension m × k
and n × k respectively, where k is the number of latent factors. However, in
the above setting it is assumed that all the entries of the rating matrix R is
known, which is not the case with sparse rating matrices. Fortunately, latent
factor model can still find the matrices U and V even when the rating matrix
R is sparse. It does it by modifying the cost function to take only known rating
values into account. This modification is achieved by defining a weight matrix
W in the following manner:
Wij =
(
1, rij is known
0, rij is unknown
Then, we can reformulate the optimization problem as
minimize
U,V
Xm
i=1
Xn
j=1
Wij (rij − (UV T
)ij )
2
(5)
Since the rating matrix R is sparse, the observed set of ratings is very small.
As a result, it might cause over-fitting. A common approach to address this
problem is to use regularization. The optimization problem with regularization
is given by equation 6. The regularization parameter λ is always non-negative
and it controls the weight of the regularization term.
minimize
U,V
Xm
i=1
Xn
j=1
Wij (rij − (UV T
)ij )
2 + λ kUk
2
F + λ kV k
2
F (6)
There are many variations to the unconstrained matrix factorization formulation (equation 6) depending on the modification to the objective function and
the constraint set. In this project, we will explore two such variations:
• Non-negative matrix factorization (NNMF)
• Matrix factorization with bias (MF with bias)
5.2 Non-negative matrix factorization (NNMF)
Non-negative matrix factorization may be used for ratings matrices that are
non-negative. As we have seen in the lecture, that the major advantage of this
method is the high level of interpretability it provides in understanding the useritem interactions. The main difference from other forms of matrix factorization
is that the latent factors U and V must be non-negative. Therefore, optimization
formulation in non-negative matrix factorization is given by 7
minimize
U,V
Xm
i=1
Xn
j=1
Wij (rij − (UV T
)ij )
2 + λ kUk
2
F + λ kV k
2
F
subject to U ≥ 0, V ≥ 0
(7)
8
There are many optimization algorithms like stochastic gradient descent (SGD),
alternating least-squares (ALS),etc for solving the optimization problem in 7.
Since you are familiar with the SGD method, we will not describe it here. Instead, we will provide the motivation and main idea behind the ALS algorithm.
SGD is very sensitive to initialization and step size. ALS is less sensitive to
initialization and step size, and therefore a more stable algorithm than SGD.
ALS also has a faster convergence rate than SGD. The main idea in ALS, is to
keep U fixed and then solve for V . In the next stage, keep V fixed and solve for
U. In this algorithm, at each stage we are solving a least-squares problem.
Although ALS has a faster convergence rate and is more stable, we will use
SGD in this project. The main reason behind this is based on the fact that the
python package that we will be using to design the NNMF-based collaborative
filter only has the SGD implementation. This choice would have no effect on
the performance of the filter designed because both the SGD and ALS converges
for the MovieLens dataset. The only downside of using SGD is that it will take
a little bit longer to converge, but that will not be a big issue as you will see
while designing the NNMF filter.
Question 16: Is the optimization problem given by equation 5 convex? Consider
the optimization problem given by equation 5. For U fixed, formulate it as a
least-squares problem.
5.2.1 Prediction function
After we have solved the optimization problem in equation 7 for U and V , then
we can use them for predicting the ratings.The predicted rating of user i for
item j, denoted by ˆrij , is given by equation 8
rˆij =
X
k
s=1
uis · vjs (8)
Having covered the basics of matrix factorization, now we are ready to implement a NNMF based collaborative filter to predict the ratings of the movies.
We have provided you with the necessary background to implement the filter on
your own, but we don’t require you to do that. Instead, you can use provided
functions in Python for the implementation.
5.2.2 Design and test via cross-validation
In this part, you will design a NNMF-based collaborative filter and test its performance via 10-fold cross validation. Details on 10-fold cross validation have
been provided in one of the earlier sections.
Question 17: Design a NNMF-based collaborative filter to predict the ratings of
the movies in the MovieLens dataset and evaluate it’s performance using 10-fold
cross-validation. Sweep k (number of latent factors) from 2 to 50 in step sizes
9
of 2, and for each k compute the average RMSE and average MAE obtained
by averaging the RMSE and MAE across all 10 folds. Plot the average RMSE
(Y-axis) against k (X-axis) and the average MAE (Y-axis) against k (X-axis).
For solving this question, use the default value for the regularization parameter.
For solving question 17, the functions described in the documentation below
might be useful
http://surprise.readthedocs.io/en/stable/matrix_factorization.html
Question 18: Use the plot from question 17, to find the optimal number of
latent factors. Optimal number of latent factors is the value of k that gives
the minimum average RMSE or the minimum average MAE. Please report the
minimum average RMSE and MAE. Is the optimal number of latent factors
same as the number of movie genres?
5.2.3 NNMF filter performance on trimmed test set
Having designed the NNMF filter in the previous section, now we will test the
performance of the filter in predicting the ratings of the movies in the trimmed
test set. We will use the same trimming operations as before.
Question 19: Design a NNMF collaborative filter to predict the ratings of the
movies in the popular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Sweep k (number of latent factors) from 2 to
50 in step sizes of 2, and for each k compute the average RMSE obtained by
averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k
(X-axis). Also, report the minimum average RMSE
Question 20: Design a NNMF collaborative filter to predict the ratings of the
movies in the unpopular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Sweep k (number of latent factors) from 2 to
50 in step sizes of 2, and for each k compute the average RMSE obtained by
averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k
(X-axis). Also, report the minimum average RMSE
Question 21: Design a NNMF collaborative filter to predict the ratings of the
movies in the high variance movie trimmed test set and evaluate it’s performance using 10-fold cross validation. Sweep k (number of latent factors) from 2
to 50 in step sizes of 2, and for each k compute the average RMSE obtained by
averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k
(X-axis). Also, report the minimum average RMSE
For solving questions 19,20, and 21 use the same hints as before.
5.2.4 Performance evaluation using ROC curve
In this part, we will evaluate the performance of the NNMF-based collaborative
filter using the ROC curve. For details on the plotting of the ROC refer to the
earlier sections.
10
Question 22: Plot the ROC curves for the NNMF-based collaborative filter
designed in question 17 for threshold values [2.5, 3, 3.5, 4]. For the ROC plotting use the optimal number of latent factors found in question 18. For each of
the plots, also report the area under the curve (AUC) value.
5.2.5 Interpretability of NNMF
The major advantage of NNMF over other forms of matrix factorization is not
necessarily one of accuracy, but that of the high level of interpretability it provides in understanding user-item interactions. In this part of the project, we
will explore the interpretability of NNMF. Specifically, we will explore the connection between the latent factors and the movie genres.
Question 23: Perform Non-negative matrix factorization on the ratings matrix
R to obtain the factor matrices U and V , where U represents the user-latent
factors interaction and V represents the movie-latent factors interaction (use k
= 20). For each column of V , sort the movies in descending order and report
the genres of the top 10 movies. Do the top 10 movies belong to a particular
or a small collection of genre? Is there a connection between the latent factors
and the movie genres?
In question 23, there will be 20 columns of V and you don’t need to report
the top 10 movies and genres for all the 20 columns. You will get full credit, as
long as you report for a couple columns and provide a clear explanation on the
connection between movie genres and latent factors.
5.3 Matrix factorization with bias (MF with bias)
In MF with bias, we modify the cost function (equation 6) by adding bias term
for each user and item. With this modification, the optimization formulation of
MF with bias is given by equation 9
minimize
U,V,bu,bi
Xm
i=1
Xn
j=1
Wij (rij − rˆij )
2 + λ kUk
2
F + λ kV k
2
F + λ
Xm
u=1
b
2
u + λ
Xn
i=1
b
2
i
(9)
In the above formulation, bu is the bias of user u and bi
is the bias of item i,
and we jointly optimize over U, V, bu, bi to find the optimal values.
5.3.1 Prediction function
After we have solved the optimization problem in equation 9 for U, V, bu, bi
, then
we can use them for predicting the ratings. The predicted rating of user i for
item j, denoted by ˆrij is given by equation 10
rˆij = µ + bi + bj +
X
k
s=1
uis · vjs (10)
11
where µ is the mean of all ratings, bi
is the bias of user i, and bj is the bias of
item j.
5.3.2 Design and test via cross-validation
In this part, you will design a MF with bias collaborative filter and test it’s performance via 10-fold cross validation. Details on 10-fold cross validation have
been provided in one of the earlier sections.
Question 24: Design a MF with bias collaborative filter to predict the ratings of
the movies in the MovieLens dataset and evaluate it’s performance using 10-fold
cross-validation. Sweep k (number of latent factors) from 2 to 50 in step sizes
of 2, and for each k compute the average RMSE and average MAE obtained
by averaging the RMSE and MAE across all 10 folds. Plot the average RMSE
(Y-axis) against k (X-axis) and the average MAE (Y-axis) against k (X-axis).
For solving this question, use the default value for the regularization parameter.
For solving question 24, the function (SVD) described in the documentation
below might be useful
http://surprise.readthedocs.io/en/stable/matrix_factorization.html
Question 25: Use the plot from question 24, to find the optimal number of
latent factors. Optimal number of latent factors is the value of k that gives
the minimum average RMSE or the minimum average MAE. Please report the
minimum average RMSE and MAE.
5.3.3 MF with bias filter performance on trimmed test set
Having designed the MF with bias filter in the previous section, now we will
test the performance of the filter in predicting the ratings of the movies in the
trimmed test set. We will use the same trimming operations as before.
Question 26: Design a MF with bias collaborative filter to predict the ratings of
the movies in the popular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Sweep k (number of latent factors) from 2 to
50 in step sizes of 2, and for each k compute the average RMSE obtained by
averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis) against k
(X-axis). Also, report the minimum average RMSE
Question 27: Design a MF with bias collaborative filter to predict the ratings of the movies in the unpopular movie trimmed test set and evaluate it’s
performance using 10-fold cross validation. Sweep k (number of latent factors)
from 2 to 50 in step sizes of 2, and for each k compute the average RMSE obtained by averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis)
against k (X-axis). Also, report the minimum average RMSE
Question 28: Design a MF with bias collaborative filter to predict the ratings of the movies in the high variance movie trimmed test set and evaluate it’s
performance using 10-fold cross validation. Sweep k (number of latent factors)
12
from 2 to 50 in step sizes of 2, and for each k compute the average RMSE obtained by averaging the RMSE across all 10 folds. Plot average RMSE (Y-axis)
against k (X-axis). Also, report the minimum average RMSE
For solving questions 26,27, and 28 use the same hints as before.
5.3.4 Performance evaluation using ROC curve
In this part, we will evaluate the performance of the MF with bias collaborative
filter using the ROC curve. For details on the plotting of the ROC refer to the
earlier sections.
Question 29: Plot the ROC curves for the MF with bias collaborative filter
designed in question 24 for threshold values [2.5, 3, 3.5, 4]. For the ROC plotting use the optimal number of latent factors found in question 25. For each of
the plots, also report the area under the curve (AUC) value.
6 Naive collaborative filtering
In this part of the project, we will implement a naive collaborative filter to
predict the ratings of the movies in the MovieLens dataset. This filter returns
the mean rating of the user as it’s predicted rating for an item.
6.1 Prediction function
The predicted rating of user i for item j, denoted by ˆrij is given by equation 11
rˆij = µi (11)
where µi
is the mean rating of user i.
6.2 Design and test via cross-validation
Having defined the prediction function of the naive collaborative filter, we will
design a naive collaborative filter and test it’s performance via 10-fold cross
validation.
Question 30: Design a naive collaborative filter to predict the ratings of the
movies in the MovieLens dataset and evaluate it’s performance using 10-fold
cross validation. Compute the average RMSE by averaging the RMSE across
all 10 folds. Report the average RMSE.
Note that in this case, when performing the cross-validation, there is no need to
calculate µi
’s for the training folds each time. You are only asked to use a single set of µi
’s calculated on the entire dataset and validate on 10 validation folds.
An important thing to note about the naive collaborative filter is that there
is no notion of training. For solving question 30, split the dataset into 10 pairs
of train set and test set and for each pair predict the ratings of the movies in
the test set using the prediction function (no model fitting required). Then
compute the RMSE for this fold and repeat the procedure for all the 10 folds.
The average RMSE is computed by averaging the RMSE across all the 10 folds.
13
6.3 Naive collaborative filter performance on trimmed test
set
Having designed the naive collaborative filter in the previous section, now we
will test the performance of the filter in predicting the ratings of the movies in
the trimmed test set. We will use the same trimming operations as before.
Question 31: Design a naive collaborative filter to predict the ratings of the
movies in the popular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Compute the average RMSE by averaging the
RMSE across all 10 folds. Report the average RMSE.
Question 32: Design a naive collaborative filter to predict the ratings of the
movies in the unpopular movie trimmed test set and evaluate it’s performance
using 10-fold cross validation. Compute the average RMSE by averaging the
RMSE across all 10 folds. Report the average RMSE.
Question 33: Design a naive collaborative filter to predict the ratings of the
movies in the high variance movie trimmed test set and evaluate it’s performance using 10-fold cross validation. Compute the average RMSE by averaging
the RMSE across all 10 folds. Report the average RMSE.
7 Performance comparison
In this section, we will compare the performance of the various collaborative
filters (designed in the earlier sections) in predicting the ratings of the movies
in the MovieLens dataset.
Question 34: Plot the ROC curves (threshold = 3) for the k-NN, NNMF, and
MF with bias based collaborative filters in the same figure. Use the figure to
compare the performance of the filters in predicting the ratings of the movies.
8 Ranking
Two primary ways in which a recommendation problem may be formulated are:
1. Prediction version of problem: Predict the rating value for a user-item
combination
2. Ranking version of problem: Recommend the top k items for a particular
user
In previous parts of the project, we have explored collaborative filtering techniques for solving the prediction version of the problem. In this part, we will
explore techniques for solving the ranking version of the problem. There are
two approaches to solve the ranking problem:
• Design algorithms for solving the ranking problem directly
• Solve the prediction problem and then rank the predictions
14
Since we have already solved the prediction problem, so for continuity we will
take the second approach to solving the ranking problem.
8.1 Ranking predictions
The main idea of the second approach is that it is possible to rank all the items
using the predicted ratings. The ranking can be done in the following manner:
• For each user, compute it’s predicted ratings for all the items using one
of the collaborative filtering techniques. Store the predicted ratings as a
list L.
• Sort the list in descending order, the item with the highest predicted
ratings appears first and the item with the lowest predicted ratings appears
last.
• Select the first t-items from the sorted list to recommend to the user.
8.2 Evaluating ranking using precision-recall curve
Precision-recall curve can be used to evaluate the relevance of the ranked list.
Before stating the expressions for precision and recall in the context of ranking,
let’s introduce some notation:
S(t) : The set of items of size t recommended to the user. In this recommended set, ignore (drop) the items for which we don’t have a ground truth
rating.
G: The set of items liked by the user (ground-truth positives)
Then with the above notation, the expressions for precision and recall are given
by equations 8 and 9 respectively
P recision(t) = |S(t) ∩ G|
|S(t)|
(12)
Recall(t) = |S(t) ∩ G|
|G|
(13)
Question 35: Precision and Recall are defined by the mathematical expressions given by equations 12 and 13 respectively. Please explain the meaning of
precision and recall in your own words.
Both precision and recall are functions of the size of the recommended list (t).
Therefore, we can generate a precision-recall plot by varying t.
Question 36: Plot average precision (Y-axis) against t (X-axis) for the ranking obtained using k-NN collaborative filter predictions. Also, plot the average
15
recall (Y-axis) against t (X-axis) and average precision (Y-axis) against average
recall (X-axis). Use the k found in question 11 and sweep t from 1 to 25 in step
sizes of 1. For each plot, briefly comment on the shape of the plot.
Question 37: Plot average precision (Y-axis) against t (X-axis) for the ranking obtained using NNMF-based collaborative filter predictions. Also, plot the
average recall (Y-axis) against t (X-axis) and average precision (Y-axis) against
average recall (X-axis). Use optimal number of latent factors found in question
18 and sweep t from 1 to 25 in step sizes of 1. For each plot, briefly comment
on the shape of the plot.
Question 38: Plot average precision (Y-axis) against t (X-axis) for the ranking
obtained using MF with bias-based collaborative filter predictions. Also, plot
the average recall (Y-axis) against t (X-axis) and average precision (Y-axis)
against average recall (X-axis). Use optimal number of latent factors found in
question 25 and sweep t from 1 to 25 in step sizes of 1. For each plot, briefly
comment on the shape of the plot.
We provide you the following hints that will help you solve questions 36,37,
and 38:
• Use threshold = 3 for obtaining the set G
• Use 10-fold cross-validation to obtain the average precision and recall values for each value of t. To be specific, compute precision and recall for
each user using equations 12 and 13 and then average across all the users
in the test set to obtain the precision and recall for this fold. Now repeat
the above procedure to compute the precision and recall for all the folds
and then take the average across all the 10-folds to obtain the average
precision and average recall value for this value of t.
• If |G| = 0 for some user in the test set, then drop this user
• If some user in the test set has rated less than t items, then drop this user
Question 39: Plot the precision-recall curve obtained in questions 36,37, and
38 in the same figure. Use this figure to compare the relevance of the recommendation list generated using k-NN, NNMF, and MF with bias predictions.
Submission
Please submit a zip file containing your report, and your codes with a readme
file on how to run your code to CCLE. The zip file should be named as
“Project3 UID1 UID2 … UIDn.zip” where UIDx’s are student ID numbers of
the team members. One submission per team is required. If you have any
questions you can contact the TAs or post on Piazza.
16
